Truck Super Singles

Proudly Manufactured in Australia by


Australian

Adventure

Vehicles

Mitsubishi Fuso Canter 4x4  Post 2009 ( FG84, FGB71) - 6 Stud

Isuzu NPS 250 & 300 4x4     Pre 2008 ( N5 Series with Single Head Light)  - 6 Stud


For the Fuso and Isuzu vehicles the front is reversed to fit the rear, so only one spare is needed.


The wheels align exactly for easier and safer driving in sand, mud and snow.


The wheels are fitted with two valve stems allowing easy access when mounted face out or in.  



For  GVM up to 7000Kg

17x9" Steel Rims fitted and balanced with 35 or 37"x12.5 R17 Federal Xplorer   $ 1345 each incl GST                   


For  GVM up to 6800Kg

17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator AT's 135Q   $ 1185 each incl GST  


17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator MT's 135Q   $ 1345 each incl GST  

Isuzu NPS 250 & 300 4x4    Post 2008 to Current  

(NH Series with Double Stack Headlight) 6 Stud

  

In 2010 Isuzu changed the axle lengths so these are a different offset to the above to align exactly for easier and safer driving in sand, mud and snow.


The front is reversed to fit the rear, so only one spare is needed.


The wheels are fitted with two valve stems allowing easy access when mounted face out or in.  




For  GVM up to 7000Kg


17x9" Steel Rims fitted and balanced with 35 or 37"x12.5 R17 Federal Xplorer   $ 1345 each incl GST    


17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator AT's 135Q   $ 1185 each incl GST    



17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator MT's 135Q   $ 1345 each incl GST    

Hino 817  4x4  6 Stud


For the Hino vehicles the front is reversed to fit the rear, so only one spare is needed.


The wheels align exactly for easier and safer driving in sand, mud and snow.


The wheels are fitted with two valve stems allowing easy access when mounted face out or in.




            


For  GVM up to 6700Kg

17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator AT's 135Q   $ 1185 each incl GST    

17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator MT's 135Q   $ 1385 each incl GST    



For  GVM up to 6700Kg

17x9" Steel Rims fitted and balanced with 35 or 37"x12.5 R17 Federal Xplorer   $ 1345 each incl GST    

Protect your investment by adding a  AAV  TPMS - Tyre Prssure Monitoring System.            

Set of 5 or 6 $700  + FITTING


IVECO DAILY Pre 2020


WITH MASSIVE 65mm HOLES FOR MORE COOLING

The Iveco 4x4 is dual tyre rated for BOTH the 32" on-road tyres on 17.5" rims and 36.6"( Michelin 255 100R16's) off road tyres on 16"rims.

This means that legally you can fit 37" tyres on 17x9" rims onto the vehicle.

If you order the vehicle from Iveco with the Michelin off road tyres, it is speed limited permanently at the factory build stage at 100kph and cannot be changed. 

Our suggestion is to purchase the vehicle with the on-road tyres and change to the 17x9’s.


These rims are made of Steel and unlike alloy wheels, are built to last.

Alloy rims can not be knocked back into shape and will crack on impact rather than bend.


With the 37”  tyres the Iveco Odometer now reads accurately




For  GVM up to 7000Kg

17x9" Steel Rims fitted and balanced with 35 or 37"x12.5 R17 Federal Xplorer   $ 1345 each incl GST                      


For  GVM up to 6800Kg

17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator AT's 135Q   $ 1185 each incl GST  


17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator MT's 135Q   $ 1385 each incl GST    



All the above rims have passed SAE J328 or SAE J267 fatigue testing at 2.25 the load to the required 400,000 cycles, and continued testing to an impressive 1.8 Million cycles before the equipment was turned off.

Testing

Read More

Link to

Rim Choice

Link to

Tyre Choice

Link to

Contact Us

Link to

Complete Wheel

FULL COMPLIANCE is available for these vehicles, should you need.

Either as a Second Stage Manufacturing approval for NEW vehicles or as a modification plate.

FULL COMPLIANCE is available for these vehicles, should you need.

Either as a Second Stage Manufacturing approval for NEW vehicles or as a modification plate.

Mitsubishi Fuso Canter 4x4  Pre 2009 ( FG649, FG639, FG637)  5 Stud


For the Fuso and Isuzu vehicles the front is reversed to fit the rear, so only one spare is needed.


The wheels align exactly for easier and safer driving in sand, mud and snow.


The wheels are fitted with two valve stems allowing easy access when mounted face out or in.





For  GVM up to 6500Kg

17x9" Steel Rims fitted and balanced with 35 or 37"x12.5 R17 Federal Xplorer   $ 1345 each incl GST                 


For  GVM up to 6000Kg

17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator AT's 135Q   $ 1185 each incl GST  



17x9" Steel Rims fitted and balanced with 37x13.5 R17 Gladiator MT's 135Q   $ 1385 each incl GST  



FULL COMPLIANCE is now available for these vehicles, should you need.

Either as a Second Stage Manufacturing approval for NEW vehicles or as a modification plate.



Protect your investment by adding a  AAV  TPMS - Tyre Prssure Monitoring System.            

Set of 5 or 6 $700  + FITTING


Protect your investment by adding a  AAV  TPMS - Tyre Prssure Monitoring System.            

Set of 5 or 6 $700  + FITTING


Protect your investment by adding a  AAV  TPMS - Tyre Prssure Monitoring System.            

Set of 5 or 6 $700  + FITTING