Heavy Mud Testing
Monsoon Season
Laos
Mitsubishi Fuso Canter 4x4 Post 2009 ( FG84, FGB71) - 6 Stud
Isuzu NPS 250 & 300 4x4 Pre 2008 ( N5 Series with Single Head Light) - 6 Stud
For the Fuso and Isuzu vehicles the front is reversed to fit the rear, so only one spare is needed.
The wheels align exactly for easier and safer driving in sand, mud and snow.
The rims have two valve holes, thus two valve stems are needed allowing easy access when mounted face out or in. Fitting a 90 degree valve stem on the inside will allow clearance of the front brake hub.
AUD$ 600 each incl GST ( Export price AUD$550 each)
Mitsubishi Fuso Canter 4x4 Pre 2009 ( FG649, FG639, FG637) - 5 Stud
For the Fuso Canter vehicles the front is reversed to fit the rear, so only one spare is needed.
The wheels align exactly for easier and safer driving in sand, mud and snow.
The rims have two valve holes, thus two valve stems are needed allowing easy access when mounted face out or in. Fitting a 90 degree valve stem on the inside will allow clearance of the front brake hub.
AUD$ 600 each incl GST ( Export price AUD$550 each)
Iveco Daily 4x4 pre 2020 - 6 Stud - GLOSS BLACK
NEW Iveco Daily 4x4 2020+ - 6 Stud - GLOSS BLACK
( with the independant front end)
The Iveco Daily pre 2020 4x4 is dual tyre rated for BOTH the 32" on-road tyres on 17.5" rims and 36.6"( Michelin 255 100R16's) off road tyres on 16"rims.
This means that legally you can fit these 37" (actually 36.8") tyres on 17x9" rims on the vehicle.
If you order the vehicle from Iveco with the Michelin off road tyres, it is speed limited permanently at the factory build stage at 100kph and cannot be changed.
Our suggestion is to purchase the vehicle with the on-road tyres and change to the 17x9’s.
With the 37” tyres the Iveco Odometer now reads accurately
AUD$ 600 each incl GST ( Export price AUD$550 each)
or SAE
Isuzu NPS 250 & 300 4x4 Post 2008/09 (NH Series with Double Stack Headlight) - 6 Stud
For the Isuzu vehicle the front is reversed to fit the rear, so only one spare is needed.
In 2008-09 Isuzu changed the axle lengths so these are a different offset to the above to align the front and rear wheels exactly for easier and safer driving in sand, mud and snow.
The rims have two valve holes, thus two valve stems are needed allowing easy access when mounted face out or in. Fitting a 90 degree valve stem on the inside will allow clearance of the front brake hub.
AUD$ 600 each incl GST ( Export price AUD$550 each)
All the above rims have passed at 2300Kg SAE J328 or SAE J267 fatigue testing at 2.25 the load to the required 400,000 cycles, and continued testing to an impressive 1.8 Million cycles before the equipment was turned off.